ANYCUBIC 3D Printer Resin Universal 405nm For Photon Photon S Quick Curing SLA UV Curing Resin for LCD 3D Printing 500 ml/1L
ANYCUBIC 405nm Resin for Photon 3D Printer LCD UV Sensitive Resin 500ml Liquid Printing Material
Hardness: 79 D
Viscosity(25℃): 552 mph.s
Curing wavelength: 405 nm
Liquid density: 1.1
Solid density: 1.184 g/cm⊃3;
Tensile strength: 23.4 Mpa
Curing time: 6-10 s
Elongation at break: 14.2%
Shelf life: 1 year
Terms and Conditions:
Shake well before use, please wear a glove mask, the recommended temperature of 20-25 ℃, to avoid dust and the environment.
This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.
It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty, or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure the photosensitive resin.
Dear customer: Please notice that the resin version is changed to the newest version brown bottle.
Brand Name: NOVA3D Origin: CN(Origin) Form: Liquid Material: Photosensitive Uv Resin Model Number: Standard Resin Curing wave length: 405 Bottom exposure times: 7s Normal exposure times: 30s Layer: 0.05mm Shrinkage: 6.8% Liquid density: 1.1 Tensile strength: 23.4 Mpa Dropship/Wholesale: Support
SUNLU 1.75MM PETG BLUE 3D Printer filament 1.75mm 1KG(2.2lb)
PETG Filament Features
PETG filament good toughness, high hardness, the impact strength is 30 times more than PLA, and the elongation at break of more than 50 times PLA.
Compatible printers must have a heating device, can print models that have a strict requirement of toughness and strength, such as pedant, also can print strongly heated-resistance and transparent models, such as lampshade.
Color: Due to the difference in monitors and lighting effect, the picture may not reflect 100% the actual color of the item. Thank you for your understanding.
1. All of our 3D printer filaments are 100% virgin material, never use recycled material or regrind material, and all had achieved the latest REACH certificate.
2. Before mass production, our engineer always does the test to make sure that each batch of new raw materials must be printed by a 3D printer.
3. The Laser diameter runs automatically to control the diameter of the filaments and keeps it in the right range of 1.75/3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off and never use it.
4. To keep the filaments dry, each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.